DPI, PPI and Image Resolution: A Simple Guide
A print shop asks for “300 DPI”, a form asks for an image “at least 600 × 600 pixels”, and your photo editor talks about resolution. These terms are related but not the same, and mixing them up leads to blurry prints or files that are far bigger than necessary.
Here is what each term really means and how to work out the right size for screens and for print.
Pixels: the only thing a digital image really has
A digital photo is a grid of colored dots called pixels. A photo that is 4000 × 3000 pixels contains 12 million pixels, or 12 megapixels. This pixel count is the image’s real resolution: it decides how much detail the image can show.
PPI and DPI
- PPI (pixels per inch) says how many pixels are placed in each inch when the image is displayed or printed.
- DPI (dots per inch) describes how many ink dots a printer lays down per inch. A printer uses several dots to reproduce one pixel.
- In everyday use, and in most software, “DPI” is used to mean PPI. When a print shop asks for 300 DPI, they mean 300 pixels per inch of print.
Changing the DPI number does not change quality
Image files store a DPI value, but changing it alone does not add or remove a single pixel. It only changes the print size that software suggests. Print size is simply the number of pixels divided by the PPI: 3000 pixels printed at 300 PPI make 10 inches.
How many pixels do you need for print?
For sharp photo prints viewed up close, aim for 300 PPI. Posters seen from a distance look fine at 150–200 PPI.
- 10 × 15 cm (4 × 6 inch) photo at 300 PPI: 1200 × 1800 pixels
- A4 page at 300 PPI: 2480 × 3508 pixels
- US Letter page at 300 PPI: 2550 × 3300 pixels
What about screens and websites?
Screens only care about pixels. For websites, presentations and social media, images around 1,200–2,000 pixels wide look sharp on almost every device. Anything larger mostly adds file size. Remember that enlarging a small image cannot create detail that was never captured; start from the largest original you have.